Chem-Crest® SolvaClean 72
Eco-friendly, non-flammable solvent used for precision cleaning applications.
Chem-Crest SolvaClean 72 is a clear, colorless, and low-odor fluid intended to replace ozone-depleting substances (ODSs), compounds with high global warming potential (GWP), and chlorinated materials in many applications.
|Description||Chem-Crest SolvaClean 72 is a clear, colorless, and low-odor fluid intended to replace ozone-depleting substances (ODSs), compounds with high global warming potential (GWP), and chlorinated materials in many applications. Chem-Crest SolvaClean 72 has a higher boiling point than most CFCs, HCFCs and HFCs, reducing evaporative losses. The low surface tension and low viscosity of Chem-Crest SolvaClean 72 fluid make it ideal for use in vapor degreasing and cold cleaning applications. In addition, its chemical and thermal stability, non-flammability and low toxicity make it useful for many other industrial applications, such as specialty solvent and heat transfer applications.|
|Typical Contaminants Removed||Chem-Crest SolvaClean 72 can be used in light-duty cleaning (neat) to remove particulates, fluorolubes, light oils and fluoropolymers. It is also used as a lubricant carrier in fluorocarbons, hydrocarbons, and silicones. It is used as a heat transfer, specialty, dispersion medium, and extraction solvent. It is a CFC, HCFC, HFC, and PFC replacement agent.|
|Operating Conditions||Chem-Crest SolvaClean 72 is used at 100% by volume in ultrasonic immersion and vapor degreasing applications. Contact your Crest representative for product-line-specific recommendations.|
|Substrate Compatibility||Chem-Crest SolvaClean 72 is compatible with most metals and hard polymers. Soft and elastomeric materials should be limited to compounds with the least amount of extractable plasticizer. Please ask your local representative for polymer compatibilities. Further material testing can be completed in the Applications Lab.|
|Availability||Chem-Crest SolvaClean 72 is available in 5-gallon pails and 55-gallon drums.
For further information on this product, please contact the Chemical Sales Office at:
Crest Ultrasonics Corporation, 18 Graphics Drive | Ewing, NJ 08628 | USA
|Physical Data||Flash point: None
Boiling Point: 76°C (168.8°F)
Specific Gravity: 1.432
Viscosity: 0.61 cps @ 25°C
Solubility in Water: < 20 ppm
** These are typical values and do not constitute specifications.
|Storage Conditions and Disposal Materials||Store in a cool, well-ventilated area. Dispose in accordance with Federal, State, and Local regulations and procedures.|
|Safety Precautions||See Safety Data Sheet|
Disclaimer: All statements, technical information, and recommendations contained herein are based on tests or other information available to us, which we believe to be reliable, but the accuracy and completeness thereof is not guaranteed and are made without representation or warranty. They are presented for your own investigation and verification. Products discussed are sold without warranty, expressed or implied, in law or fact and upon the condition that the purchasers make their own tests to determine the suitability of such products to their particular purpose. We shall not be liable for any injury, loss, or damage direct or consequential, arising out of the use or the inability to use the product. It is the user's obligation and responsibility to determine that any use of the product or the information may infringe on patent rights.