Chem-Crest® SolvaClean DA
Eco-friendly, non-flammable, azeotropic solvent blend used for precision cleaning applications.
Chem-Crest SolvaClean DA is a unique, high-performing, non-flammable, azeotropic fluorinated, chlorinated, and isopropanol solvent blend explicitly developed as a safe, powerful, and environmentally favorable product for the critical cleaning of precision components.
The robust azeotropic structure means that Chem-Crest SolvaClean DA can be continually recovered by distillation within the vapor degreaser without any changes in the composition or by using an external recovery system.
As a result, Chem-Crest SolvaClean DA suits various engineered parts, medical, electronics, optical and other precision cleaning applications.
|Description||Chem-Crest SolvaClean DA is a unique, high performing, non-flammable, azeotropic fluorinated, chlorinated & isopropanol solvent blend developed specifically as a safe, powerful, and environmentally favorable product for the critical cleaning of precision components. The robust azeotropic structure means that Chem-Crest SolvaClean DA can be continually recovered by distillation within the vapor degreaser without any changes in the composition or by using an external recovery system. Chem-Crest SolveClean DA is suitable for use in a wide range of engineered parts, medical, electronics, optical, and other precision cleaning applications.|
|Typical Contaminants Removed||Chem-Crest SolvaClean DA removes rosin solder flux residues, oils, greases and waxes. It is designed to replace CFCs, HCFCs, HFCs, PB and chlorinated solvents. This product has zero ozone depletion potential and other favorable environmental, health and safety properties. The isopropanol in Chem-Crest SolvaClean DA fluid provides enhanced removal of ionic contaminants.|
|Operating Conditions||Chem-Crest SolvaClean DA used at 100% by volume in immersion and vapor degreasing applications. Contact your Crest representative for product-line specific recommendations.|
|Substrate Compatibility||Chem-Crest SolvaClean DA is safe on various metals, including aluminum, brass, bronze, copper, steels, glass, and ceramics, when used as directed. Please ask your local representative for polymer compatibilities. Further material testing can be completed in the Applications Lab.|
|Availability||Chem-Crest SolvaClean DA is available in 5-gallon (50.7 lb) pails and 55-gallon (529 lb) drums.
For further information on this product, please contact the Chemical Sales Office at:
Crest Ultrasonics Corporation, 18 Graphics Drive | Ewing, NJ 08628 | USA
|Physical Data||Flash point: None
Boiling Point: 45°C (113°F)
Specific Gravity: 1.27
Viscosity: 0.43 cPs @ 25°C
Solubility in Water: 0.06% @20°C
** These are typical values and do not constitute specifications.
|Storage Conditions and Disposal Materials||Store in tightly closed original container in a cool and well-ventilated area with ambient temperatures between 30°C Dispose in accordance with Federal, State, and Local regulations and procedures.|
|Safety Precautions||See Safety Data Sheet|
Disclaimer: All statements, technical information, and recommendations contained herein are based on tests or other information available to us, which we believe to be reliable, but the accuracy and completeness thereof is not guaranteed and are made without representation or warranty. They are presented for your own investigation and verification. Products discussed are sold without warranty, expressed or implied, in law or fact and upon the condition that the purchasers make their own tests to determine the suitability of such products to their particular purpose. We shall not be liable for any injury, loss, or damage direct or consequential, arising out of the use or the inability to use the product. It is the user's obligation and responsibility to determine that any use of the product or the information may infringe on patent rights.