Mildly acidic, oxide removal liquid detergent concentrate.
Removes oxides, scale and tarnish. Cleans soils such as oils, light grease, fingerprints, dust, and airborne contaminants.
|Chem-Crest 35 is a mildly acidic liquid cleaner developed to remove various oxides. It removes tarnish and brightens metals such as brass, copper, bronze, and stainless steel. Chem-Crest 35 has also found uses in the removal of light oils and other general contaminants.
|Typical Contaminants Removed
|Chem-Crest 35 removes oxides, scale and tarnish. Cleans soils such as oils, light grease, fingerprints, dust, and airborne contaminants.
|Chem-Crest 35 is typically used at 5–10% by volume in ultrasonic applications. Normal operating temperatures: 140°–180°F. Chem-Crest 35 is easy to rinse and leaves no residues when ultrasonically rinsed with deionized water. The ultrasonic frequency in the rinses is recommended to be 40 kHz or 132 kHz, dependent on the material makeup of the substrate and the contaminants being removed. Contact your Crest representative for product-line specific recommendations.
|Chem-Crest 35 is compatible with aluminum, brass, bronze, copper, beryillium copper, and zinc. It is safe on glass, ceramics, and plastics. Ferrous metals must be rinsed thoroughly after treatment and then protected with a rust inhibitor, such as the Chem-Crest 77 series of rinse-injection additives.
|Chem-Crest 35 is available in cases of (8) x 1-quart bottles, (4) x 1-gallon plastic bottles, 5-gallon pails, and in 55-gallon containers.
|Flash Point: None
Specific Gravity: 1.08
ph: 3.5 +/- 0.5
Solubility in Water: Complete
(The above are typical values and do not constitute specifications.)
|Storage Conditions and Disposal Materials
|Avoid freezing conditions. Dispose in accordance with Federal, State, and Local regulations and procedures. No products contained in this concentrate are regulated under SARA Title III, Section 313.
|See Safety Data Sheet
Disclaimer: All statements, technical information, and recommendations contained herein are based on tests or other information available to us, which we believe to be reliable, but the accuracy and completeness thereof is not guaranteed and are made without representation or warranty. They are presented for your own investigation and verification. Products discussed are sold without warranty, expressed or implied, in law or fact and upon the condition that the purchasers make their own tests to determine the suitability of such products to their particular purpose. We shall not be liable for any injury, loss, or damage direct or consequential, arising out of the use or the inability to use the product. It is the user's obligation and responsibility to determine that any use of the product or the information may infringe on patent rights.